Follow Us:

MYCROGUARD - RCC

MYCROEMPU

HIGH PERFORMANCE ACRYLIC BASED RCC WATERPROOFING LIQUID MEMBRANE

MYCROGUARD RCC Tank is a two-component coating for the moisture & dam proofing treatments of water tanks with anti-microbial anti-fungal properties. It has excellent water resistance, adhesion to concrete surface, has good hardness and sets faster.

ADVANTAGES
❖ Minimum surface preparation needed
❖ Excellent adhesion.
❖ Bonds directly to porous and non- porous surfaces
❖ Waterproof and non-toxic-Ideal for potable water tanks
❖ Excellent for damp-proofing basements below ground
❖ Breathable-Allows transmission of water vapour from interior of building
❖ High resistance to carbon dioxide and chloride ion diffusion
❖ Can fill the honeycombs, dot surfaces and concrete with potholes

APPLICATION

❖ Preparation: All the surfaces which are to receive MYCROGUARD - RCC, must be free from oil, grease, wax, dirt or any other form of foreign matter which might affect adhesion. Spalled and deeply disintegrated concrete should be removed to sound concrete and repaired with Renderoc System.
❖ Mixing MYCROGUARD - RCC liquid is poured into a plastic or metal drum. To this, an equal volume of clean fresh water is added, for brush application consistency. Then mixing is started with a slow speed drill (350-450 rpm). The powder component is added gradually to the liquid avoiding lump formation and mixed for 2-4 minutes.
❖ For best results moisten the surface before coating with MYCROGUARD. Apply the mixed material using a short, stiff bristle brush preferably 100 to 150mm width like a paint. Trowel applications can be undertaken as necessary using the correct mixing ratio to obtain satisfactory consistency.
MYCROGUARD shall be applied in two coats to achieve 1mm wet film thickness. The second coat of MYCROGUARD shall applied as soon as the first coat has reached touch dry state.

USES

❖ MYCROGUARD is suitable for sealing water tanks, reservoirs, toilets and bathrooms, balconies and basements as well as filling blowholes, cracks, imperfections and for providing concrete surfaces with a uniform appearance.


COLOUR

White


DILUTION

❖ MYCROGUARD should be diluted with 3L of clean portable water


LIMITATION

❖ MYCROGUARD is not designed to perform as a permanently exposed surface. Must be protected from damage during construction. Do not apply to excessively wet surfaces.


PACKAGING

7.5 kg powder + 5 kg polymer pack


COVERAGE

❖ 2 Kg/m2 for 1.43 mm WFT or 1mm Dry Film Thickness