About Us
Contact Info
-
-
Phone
+91 9816632049 -
MYCROCORE CIA630 is an acrylic modified elastomeric
waterproofing system for exterior horizontal & vertical surface.
It is 1K acrylic based liquid membrane, ease in application
directly apply with brush/roller. It has excellent properties to
withstand pressure up to 3 bars on vertical surface & 5 bars of
positive waterproofing pressure on horizontal surface
ADVANTAGES
Strongly bonds to the substrate.
❖ Prevents peeling, flaking, or detachment
❖ Fills small pores & cracks in concrete.
❖ Prevents moisture and reduce the efflorescence
and mold growth.
❖ Compatible with all kind of cementitious
waterproofing system
❖ Protects against alkali reactions
❖ Resists exposure to chemicals, salts, and
environmental pollutants.
❖ Prevent the UV degradation
❖ Extending the lifespan of the waterproofing
system.
❖ Cleaning and surface preparation: Clean all the
surface to the sound base which is to be treated with
MYCROCORE CIA630 advanced. Remove dust, oil,
laitance any other chemicals oil etc.
❖ Crack filling: Fill the cracks if present on the substrate
with MYCROSEAL Exterior properly.
❖ Mix MYCROSIL+ with water in 1:20 and spray over
the surface & allowed to dry for 3 hrs.
❖ Mycroprime: Priming of the substrate must be done
with MYCROPRIME because priming the surface
before waterproofing will provide better adhesion to
the substrate and increase durability of waterproofing
system.
❖ Mix MYCROCORE CIA630 advanced well before use.
Apply the mix with the help of brush on the prepared
surface. After first coat dry apply 2nd coat immediately
to get better adhesion between two coats. Allow the
coating for full cure until 24 hours. Areas subjected to
moderate and heavy loads/hydrostatic pressure;
minimum 1mm thickness coating is recommended for
further information you can contact MAYFAIR
BIOTECH expert team.
❖ Roofs, balconies, terrace and verandas etc
❖ All type of old and new concrete, bridge-decks,
tunnels, stadium stands etc
White
❖ MYCROPRIME should be diluted in potable
water at the ratio of 1:2
1L, 5L, 10L and 20 L
❖ 1st Coat: 80 sq. ft /kg for horizontal surface
and 120 sq. ft / kg for vertical surface
❖ 2nd Coat: 80 - 120 sq. ft/kg