Follow Us:

MYCROEM – CIAW7770

MYCROEM – CIAW7770

HIGH PERFORMANCE ACRYLIC BASED WATERPROOFING ELECTOMERIC MEMBRANE

MYCRO-EM – CIAW7770 is a two-component acrylic polymer modified elastomeric waterproofing membrane which consists of MYCRO - EM powder and PU - acrylic emulsion. MYCRO - EM powder consists of specially selected cements, graded hardwearing aggregates and additives supplied in powder.

ADVANTAGES
❖ Minimum surface preparation needed
❖ Applied directly to the damp concrete and masonry
❖ Excellent adhesion
❖ Non-toxic-ideal for potable water tanks
❖ Excellent for damp-proofing basements
❖ Excellent for concrete roof, leaking brick and masonry walls
❖ Supports Structural Integrity
❖ Prevent the UV degradation
❖ Extending the lifespan of the waterproofing system.

APPLICATION

Cleaning and surface preparation: Clean all the surface to the sound base which is to be treated with MYCROEM advanced. Remove dust, oil, laitance any other chemicals oil etc.
❖ Crack filling: Fill the cracks if present on the substrate with MYCROSEAL Exterior properly. ❖ Mix MYCROSIL+ with water in 1:20 and spray over the surface & allowed to dry for 3 hrs.
❖ Mycroprime: Priming of the substrate must be done with MYCROPAC because priming the surface before waterproofing will provide better adhesion to the substrate and increase durability of waterproofing system.

❖ Apply the mix of MYCRO-EM with Water 7 cement grout the help of putty-mixing machine.
❖ Thickness of the applied material be 1 to 2 mm. Areas subjected to moderate and heavy loads/ hydrostatic pressure, minimum 2mm thickness coating is recommended with screed above. Allow the MYCRO - EM to dry before covering with screed. Sprinkle coarse sand on wet surface of final coat for better adhesion of screed. Average drying time is 4 to 6 hours at normal temperatures.

USES

❖ Roofs, balconies, terrace and verandas etc
❖ All type of old and new concrete, bridge-decks, tunnels, stadium stands etc


COLOUR

White


DILUTION

❖ MYCROPRIME should be diluted in potable water at the ratio of 1:2


PACKAGING

1L, 5L, 10L and 20 L


COVERAGE

❖ 1st Coat: 80 sq. ft /kg for horizontal surface and 120 sq. ft / kg for vertical surface
❖ 2nd Coat: 80 - 120 sq. ft/kg
❖ 2nd Coat: 80 - 120 sq. ft/kg